Original file

Opel Insignia 2.0CDTI Bosch EDC17C19 0281016704 / 1037520125

An original (stock) flash read of the Bosch EDC17C19 control unit, fitted in Opel Insignia 2.0CDTI, hardware number 0281016704 and software number 1037520125, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Insignia 2.0CDTI2.0 diesel 130HP
Control unit
Bosch EDC17C19
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0281016704
Software number
1037520125
Bosch part / software
1037503587
Software / calibration
P_564_EDC17C19_OB5C2_0

Technical data

Vehicle
BrandOpel
Car modelInsignia 2.0CDTI
Engine2.0 diesel 130HP
Control unit
Control unitBosch EDC17C19
ECU makerBosch
Hardware number0281016704
Software number1037520125
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameOpel Insignia 130HP
File key5883b259d6750312
Identification read from the file
ECU nameEDC17C19
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037503587Offset in the file: 0x02001A
Software / calibrationP_564_EDC17C19_OB5C2_0Offset in the file: 0x0392C0
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00D22D
Bosch project identifier (EPK)51/1/EDC17_C19/564/P_564//P_564_EDC17C19_OB5C2_0///Offset in the file: 0x0392C0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016704 and software number 1037520125. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C19

HardwareSoftwareVehicles
02810157741037A50877Opel Insignia
02810157741037A50878Opel Insignia 2009 Turbo Diesel, Opel Insignia 2012 Turbo Diesel
02810167041037378081Opel Insignia 2002 Turbo Diesel
02810167041037501148Opel Insignia
02810167041037A50729Opel Insignia
02810167041037A50730Opel Insignia
02810167041037A50731Opel Insignia
02810167041037A50737Opel Insignia 2012 Turbo Diesel

Bosch EDC17C19 original files

The Bosch EDC17C19 unit page