Original file

Opel Insignia Bosch EDC17C19 0281016704 / 1037A50731

An original (stock) flash read of the Bosch EDC17C19 control unit, fitted in Opel Insignia, hardware number 0281016704 and software number 1037A50731, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Insignia2.0 diesel 110PS
Control unit
Bosch EDC17C19
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281016704
Software number
1037A50731
Software / calibration
P_564_EDC17C19_OA4C2_0

Technical data

Vehicle
BrandOpel
Car modelInsignia
Engine2.0 diesel 110PS
Power110.1PS / 81.0kW
Control unit
Control unitBosch EDC17C19
ECU makerBosch
Hardware number0281016704
Software number1037A50731
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd215acca4faa6c8c
Identification read from the file
ECU nameEDC17C19
Read typeCalibration only (data set)
Software / calibrationP_564_EDC17C19_OA4C2_0Offset in the file: 0x180A10
Bosch project identifier (EPK)51/1/EDC17_C19/564/P_564//P_564_EDC17C19_OA4C2_0///Offset in the file: 0x180A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016704 and software number 1037A50731. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C19

HardwareSoftwareVehicles
02810167041037501148Opel Insignia
02810167041037520125Opel Insignia 2.0CDTI
02810167041037A50729Opel Insignia
02810167041037A50730Opel Insignia
02810167041037A50737Opel Insignia 2012 Turbo Diesel
02810167041037A50745Opel Insignia
02810167041037A50819Opel Insignia
028101710510208557AANissan Qashqai

Bosch EDC17C19 original files

The Bosch EDC17C19 unit page