Original file

Opel Insignia Bosch EDC17C19 0281017105 / 1037506631

An original (stock) flash read of the Bosch EDC17C19 control unit, fitted in Opel Insignia, hardware number 0281017105 and software number 1037506631, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Insignia2.0 diesel
Control unit
Bosch EDC17C19
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281017105
Software number
1037506631
Software / calibration
P_564_EDC17C19_OB5C2_0

Technical data

Vehicle
BrandOpel
Car modelInsignia
Engine2.0 diesel
Control unit
Control unitBosch EDC17C19
ECU makerBosch
Hardware number0281017105
Software number1037506631
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2a30c27896c78c92
Identification read from the file
ECU nameEDC17C19
Read typeCalibration only (data set)
Bosch part / software1037506631Offset in the file: 0x18001A
Software / calibrationP_564_EDC17C19_OB5C2_0Offset in the file: 0x180A10
Bosch project identifier (EPK)51/1/EDC17_C19/564/P_564//P_564_EDC17C19_OB5C2_0///Offset in the file: 0x180A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017105 and software number 1037506631. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C19

HardwareSoftwareVehicles
02810171051037506627Opel Insignia
02810171051037506628Opel Insignia 2010 Turbo Diesel
02810171051037506629Opel Insignia
02810171051037506630Opel Insignia
02810171051037506633Opel Insignia
02810171051037520120Opel Insignia 2010 117.7KWKW, Opel Insignia 2012 Turbo Diesel, Opel Insignia
02810171051037520121Opel Insignia 2009 Turbo Diesel
02810171051037520124Opel Insignia

Bosch EDC17C19 original files

The Bosch EDC17C19 unit page