Original file

BMW X3 20I Bosch EDC17C41 - / 1037510742

An original (stock) flash read of the Bosch EDC17C41 control unit, fitted in BMW X3 20I, hardware number - and software number 1037510742, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X3 20Ipetrol 183.3PS / 134.8kW
Control unit
Bosch EDC17C41
Read type
Full read (boot area included)
File
12,288.00 KB · Flash
Hardware number
-
Software number
1037510742

Technical data

Vehicle
BrandBMW
Car modelX3 20I
Enginepetrol 183.3PS / 134.8kW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch EDC17C41
ECU makerBosch
Hardware number-
Software number1037510742
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File key03f3d6c54a237be7
Identification read from the file
ECU nameEDC17C41
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037510742Offset in the file: 0x01801A
Data set descriptionN47D20O1-F25N47OL_EU5_MT
Bosch project identifier (EPK)31/1/EDC17_C41/11/P_735//DLB///Offset in the file: 0x250594

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C41 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number - and software number 1037510742. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C41

Bosch EDC17C41 original files

The Bosch EDC17C41 unit page