Original file

BMW X3 3.0D Bosch EDC17C41 - / 1037518653

An original (stock) flash read of the Bosch EDC17C41 control unit, fitted in BMW X3 3.0D, hardware number - and software number 1037518653, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X3 3.0D3.0 diesel 245.0PS / 180.2KW
Control unit
Bosch EDC17C41
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
-
Software number
1037518653

Technical data

Vehicle
BrandBMW
Car modelX3 3.0D
Engine3.0 diesel 245.0PS / 180.2KW
Control unit
Control unitBosch EDC17C41
ECU makerBosch
Hardware number-
Software number1037518653
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key3c25761cf6ada339
Identification read from the file
ECU nameEDC17C41
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037518653Offset in the file: 0x01801A
Data set descriptionN57D30O1-F25N57O1_EU5_911
Bosch project identifier (EPK)32/1/EDC17_C41/11/P_735//VDUZ///Offset in the file: 0x25A44C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C41 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number - and software number 1037518653. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C41

Bosch EDC17C41 original files

The Bosch EDC17C41 unit page