Original file

BMW 5 Serie - Sedan 520d Bosch EDC17C41 N47D20O1-F10N47OL_BEL_AT / 1037518655

An original (stock) flash read of the Bosch EDC17C41 control unit, fitted in BMW 5 Serie - Sedan 520d, hardware number N47D20O1-F10N47OL_BEL_AT and software number 1037518655, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedan 520ddiesel 163.0PS / 119.9kW
Control unit
Bosch EDC17C41
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
N47D20O1-F10N47OL_BEL_AT
Software number
1037518655

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan 520d
Enginediesel 163.0PS / 119.9kW
Displacement2.0
Control unit
Control unitBosch EDC17C41
ECU makerBosch
Hardware numberN47D20O1-F10N47OL_BEL_AT
Software number1037518655
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye9e4089bda8edc6e
Identification read from the file
ECU nameEDC17C41
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037518655Offset in the file: 0x01801A
Data set descriptionN47D20O1-F10N47OL_BEL_AT
Bosch project identifier (EPK)32/1/EDC17_C41/11/P_735//VDSK///Offset in the file: 0x257140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C41 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number N47D20O1-F10N47OL_BEL_AT and software number 1037518655. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C41

Bosch EDC17C41 original files

The Bosch EDC17C41 unit page