Original file

Dacia Dokker Bosch EDC17C42 0005017045 / 1037537211

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Dacia Dokker, hardware number 0005017045 and software number 1037537211, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dacia Dokker1.5 diesel 90PS
Control unit
Bosch EDC17C42
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0005017045
Software number
1037537211
Vehicle maker's hardware number
0372213R
Software / calibration
r1701_720_

Technical data

Vehicle
BrandDacia
Car modelDokker
Engine1.5 diesel 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware number0005017045
Software number1037537211
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key43dc6a118a859f56
Identification read from the file
ECU nameEDC17C42
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037537211Offset in the file: 0x02001A
Vehicle maker's hardware number0372213ROffset in the file: 0x00E906
Software / calibrationr1701_720_Offset in the file: 0x02E370
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1062//r1701_720_///Offset in the file: 0x02E370

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0005017045 and software number 1037537211. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
0000351062MCE5445TGLMRH08170173Renault Kangoo
000036106210SW000036Mercedes-Benz Citan
000089109410SW000089Renault Master III
000345106210SW0003451062_720Renault Kangoo
00064898521037532151Renault III
000857474810351841AARenault Master
003304106210SW003304Mercedes-Benz Citan
0035441062MCE1902TGLMRH02870173Renault Clio IV

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page