Original file

Renault Master III Bosch EDC17C42 00FB658RBCCS / 1037517942

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Master III, hardware number 00FB658RBCCS and software number 1037517942, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Master III2.3 diesel
Control unit
Bosch EDC17C42
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
00FB658RBCCS
Software number
1037517942
Vehicle maker's hardware number
0371754R
Software / calibration
r1704_A31_

Technical data

Vehicle
BrandRenault
Car modelMaster III
Engine2.3 diesel
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware number00FB658RBCCS
Software number1037517942
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd787c40864ed5553
Identification read from the file
ECU nameEDC17C42
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037517942Offset in the file: 0x02001A
Vehicle maker's hardware number0371754ROffset in the file: 0x00E906
Software / calibrationr1704_A31_Offset in the file: 0x02FE64
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00D23D
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1061//r1704_A31_///Offset in the file: 0x02FE64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00FB658RBCCS and software number 1037517942. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
0039361194MCE2611TGLMRH55570173Opel Vivaro
0039391194003939Renault Traffic
00398710SW003987Renault Captur / QM3
009079914210SW000030Renault Kangoo
00FB658RBCCS1037518997Renault Scenic
012018119410SW0120181194_640Opel Vivaro
013081115510SW013081Nissan NV200
02053411941022210222Renault Scenic

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page