Original file

Renault Scenic Bosch EDC17C42 0281019075 / 1037525157

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Scenic, hardware number 0281019075 and software number 1037525157, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Scenic1.9 diesel 130PS
Control unit
Bosch EDC17C42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281019075
Software number
1037525157
Vehicle maker's hardware number
0371074R
Software / calibration
r1705_C30_

Technical data

Vehicle
BrandRenault
Car modelScenic
Engine1.9 diesel 130PS
Power130.0PS / 95.6kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware number0281019075
Software number1037525157
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2a4430576cf5ed7f
Identification read from the file
ECU nameEDC17C42
Read typeCalibration only (data set)
Bosch part / software1037525157Offset in the file: 0x18001A
Vehicle maker's hardware number0371074ROffset in the file: 0x010007
Software / calibrationr1705_C30_Offset in the file: 0x180078
Bosch project identifier (EPK)38/1/EDC17_C42/15/P_752//r1705_C30_///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281019075 and software number 1037525157. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
02810184971037533473Opel Vivaro
02810186591037518997Renault Scenic
02810190351037521826Nissan Qashqai
02810190351037524453Nissan Qashqai
02810190751037537118Renault Scenic
02810193821037533296Nissan NV400
02810194711037525980Renault Scenic / Grand Scenic
02810194971037542544Renault Traffic II

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page