Original file
Renault Scenic / Grand Scenic Bosch EDC17C42 0281019471 / 1037525980
An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Scenic / Grand Scenic, hardware number 0281019471 and software number 1037525980, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Renault Scenic / Grand Scenic1.6 diesel 130PS
- Control unit
- Bosch EDC17C42
- Read type
- Full read (boot area included)
- File
- 2,048.00 KB · Flash
- Hardware number
- 0281019471
- Software number
- 1037525980
- Vehicle maker's hardware number
- 0371074R
- Software / calibration
- r1705_D10_
Technical data
| Brand | Renault |
|---|---|
| Car model | Scenic / Grand Scenic |
| Engine | 1.6 diesel 130PS |
| Power | 130.0PS / 95.6kW |
| Control unit | Bosch EDC17C42 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 0281019471 |
| Software number | 1037525980 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 540c1e634cfa48c4 |
| ECU name | EDC17C42 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Bosch part / software | 1037525980 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | 0371074R | Offset in the file: 0x00E906 |
| Software / calibration | r1705_D10_ | Offset in the file: 0x02E124 |
| Internal build string | ME(D)/EDC17 B_CB.02.05.00 | Offset in the file: 0x00D0D1 |
| Bosch project identifier (EPK) | 38/1/EDC17_C42/15/P_752//r1705_D10_/// | Offset in the file: 0x02E124 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0281019471 and software number 1037525980. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C42
| Hardware | Software | Vehicles |
|---|---|---|
| 0281019035 | 1037524453 | Nissan Qashqai |
| 0281019075 | 1037525157 | Renault Scenic |
| 0281019075 | 1037537118 | Renault Scenic |
| 0281019382 | 1037533296 | Nissan NV400 |
| 0281019497 | 1037542544 | Renault Traffic II |
| 0281019840 | 1037532905 | Opel Vivaro |
| 0281019840 | 1037534017 | Renault Traffic II |
| 0281019840 | 1037541838 | Renault Traffic |