Original file

Opel Vivaro 2010 Turbo Diesel Bosch EDC17C42 578921022861520173 / 1037517942

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Opel Vivaro 2010 Turbo Diesel, hardware number 578921022861520173 and software number 1037517942, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Vivaro 2010 Turbo Diesel2.0 diesel · 115.0PS / 84.6kW
Control unit
Bosch EDC17C42
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
578921022861520173
Software number
1037517942
Software / calibration
r1704_A31_

Technical data

Vehicle
BrandOpel
Car modelVivaro 2010 Turbo Diesel
Engine2.0 diesel
Power115.0PS / 84.6kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware number578921022861520173
Software number1037517942
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameOpel Vivaro 2.0 CDTi 2010
File keyc6d43fac05135287
Identification read from the file
ECU nameEDC17C42
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037517942Offset in the file: 0x02001A
Software / calibrationr1704_A31_Offset in the file: 0x02FE64
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00D23D
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1061//r1704_A31_///Offset in the file: 0x02FE64

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 578921022861520173 and software number 1037517942. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
5557017310SW003936Fiat Talento
5661TGLMRH1037532905Renault Traffic II
5661TGLMRH1037534017Opel Vivaro
5661TGLMRH1037539170Opel Vivaro
5981TGLMRH1037541558Renault Traffic
6171210258337301731037533473Opel Vivaro
6171210258844201731037521461Opel Vivaro
66024102081037537125Renault Megane III

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page