Original file

Renault Clio IV Bosch EDC17C42 MCE1832TGLMRH42340173 / 1037537667

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Clio IV, hardware number MCE1832TGLMRH42340173 and software number 1037537667, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Clio IV1.5 diesel 90PS
Control unit
Bosch EDC17C42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
MCE1832TGLMRH42340173
Software number
1037537667
Software / calibration
r1701_550_

Technical data

Vehicle
BrandRenault
Car modelClio IV
Engine1.5 diesel 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware numberMCE1832TGLMRH42340173
Software number1037537667
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydd5bb62c7f913787
Identification read from the file
ECU nameEDC17C42
Read typeCalibration only (data set)
Bosch part / software1037537667Offset in the file: 0x18001A
Software / calibrationr1701_550_Offset in the file: 0x180078
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1062//r1701_550_///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE1832TGLMRH42340173 and software number 1037537667. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page