Original file

Renault Clio IV Bosch EDC17C42 MCE4018TGLMRH36730173 / 1037533395

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Clio IV, hardware number MCE4018TGLMRH36730173 and software number 1037533395, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Clio IV1.5 diesel 90PS
Control unit
Bosch EDC17C42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
MCE4018TGLMRH36730173
Software number
1037533395
Software / calibration
r1701_550_

Technical data

Vehicle
BrandRenault
Car modelClio IV
Engine1.5 diesel 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware numberMCE4018TGLMRH36730173
Software number1037533395
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1bebe62b021e8825
Identification read from the file
ECU nameEDC17C42
Read typeCalibration only (data set)
Bosch part / software1037533395Offset in the file: 0x18001A
Software / calibrationr1701_550_Offset in the file: 0x180078
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1062//r1701_550_///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE4018TGLMRH36730173 and software number 1037533395. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page