Original file

Renault Vivaro Bosch EDC17C42 MCE9113TGLMRH22550173 / 1037544152

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Vivaro, hardware number MCE9113TGLMRH22550173 and software number 1037544152, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Vivaro1.6 diesel 90PS
Control unit
Bosch EDC17C42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
MCE9113TGLMRH22550173
Software number
1037544152
Software / calibration
r1710_620_

Technical data

Vehicle
BrandRenault
Car modelVivaro
Engine1.6 diesel 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware numberMCE9113TGLMRH22550173
Software number1037544152
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key813ca5415c32c3d0
Identification read from the file
ECU nameEDC17C42
Read typeCalibration only (data set)
Bosch part / software1037544152Offset in the file: 0x18001A
Software / calibrationr1710_620_Offset in the file: 0x180078
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1194//r1710_620_///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE9113TGLMRH22550173 and software number 1037544152. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
MCE8127TGLMRH959401731037542556Renault Captur
MCE8290TGLMRH223401731037537389Renault Clio IV
MCE8793TGLMRH596501731037545411Dacia Sandero, Dacia Logan
MCE9113TGLMRH066601731037552468Renault Traffic III, Renault Vivaro, Opel
MCE9411TGLMRH557401731037540093Mercedes-Benz Citan1
MCE9411TGLMRH8717017310SW000036Renault Kangoo, Renault Citan, Mercedes-Benz
MCE9424TGLMRH912401731037537061Renault Clio IV
MCE9579TGLMRH772301731037531119Dacia Sandero

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page