Original file

Dacia Sandero Bosch EDC17C42 MCE9579TGLMRH77230173 / 1037531119

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Dacia Sandero, hardware number MCE9579TGLMRH77230173 and software number 1037531119, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Dacia Sandero1.5 diesel · 90.0PS / 66.2kW
Control unit
Bosch EDC17C42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
MCE9579TGLMRH77230173
Software number
1037531119
Software / calibration
r1701_600_

Technical data

Vehicle
BrandDacia
Car modelSandero
Engine1.5 diesel
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware numberMCE9579TGLMRH77230173
Software number1037531119
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd8621dc864876f79
Identification read from the file
ECU nameEDC17C42
Read typeCalibration only (data set)
Bosch part / software1037531119Offset in the file: 0x18001A
Software / calibrationr1701_600_Offset in the file: 0x180078
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1062//r1701_600_///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MCE9579TGLMRH77230173 and software number 1037531119. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
MCE8793TGLMRH596501731037545411Dacia Sandero, Dacia Logan
MCE9113TGLMRH066601731037552468Renault Traffic III, Renault Vivaro, Opel
MCE9113TGLMRH225501731037544152Renault Vivaro
MCE9411TGLMRH557401731037540093Mercedes-Benz Citan1
MCE9411TGLMRH8717017310SW000036Renault Kangoo, Renault Citan, Mercedes-Benz
MCE9424TGLMRH912401731037537061Renault Clio IV
r1704_A31_1037533391Opel Vivaro
r1708_D40_10SW001383Renault Master III

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page