Original file

Renault Master III Bosch EDC17C42 r1708_D40_ / 10SW001383

An original (stock) flash read of the Bosch EDC17C42 control unit, fitted in Renault Master III, hardware number r1708_D40_ and software number 10SW001383, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Master III2.3 diesel 125PS
Control unit
Bosch EDC17C42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
r1708_D40_
Software number
10SW001383

Technical data

Vehicle
BrandRenault
Car modelMaster III
Engine2.3 diesel 125PS
Power125PS / 91.9kW
Control unit
Control unitBosch EDC17C42
ECU makerBosch
Hardware numberr1708_D40_
Software number10SW001383
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key419b8e2e931e44cf
Identification read from the file
ECU nameEDC17C42
Read typeCalibration only (data set)
Bosch part / software10SW001383Offset in the file: 0x18001A
Software / calibrationr1708_D40_Offset in the file: 0x180078
Bosch project identifier (EPK)39/1/EDC17_C42/15/P_1094//r1708_D40_///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number r1708_D40_ and software number 10SW001383. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C42

HardwareSoftwareVehicles
MCE8793TGLMRH596501731037545411Dacia Sandero, Dacia Logan
MCE9113TGLMRH066601731037552468Renault Traffic III, Renault Vivaro, Opel
MCE9113TGLMRH225501731037544152Renault Vivaro
MCE9411TGLMRH557401731037540093Mercedes-Benz Citan1
MCE9411TGLMRH8717017310SW000036Renault Kangoo, Renault Citan, Mercedes-Benz
MCE9424TGLMRH912401731037537061Renault Clio IV
MCE9579TGLMRH772301731037531119Dacia Sandero
r1704_A31_1037533391Opel Vivaro

Bosch EDC17C42 original files

The Bosch EDC17C42 unit page