Original file

Mercedes-Benz W169 Bosch EDC17C43 0281017707 / 1037510890

An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz W169, hardware number 0281017707 and software number 1037510890, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz W169080KW
Control unit
Bosch EDC17C43
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281017707
Software number
1037510890
Software / calibration
6409024000

Technical data

Vehicle
BrandMercedes-Benz
Car modelW169
Engine080KW
FuelDiesel
Control unit
Control unitBosch EDC17C43
ECU makerBosch
Hardware number0281017707
Software number1037510890
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameMercedes W169 640 080kW 002
File key7d5e6e9ac8c1ee35
Identification read from the file
ECU nameEDC17C43
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037510890Offset in the file: 0x02001A
Software / calibration6409024000Offset in the file: 0x020223
Data set number6409031100Offset in the file: 0x229708
Boot software6409040000Offset in the file: 0x00FC51
Bosch project identifier (EPK)44/1/EDC17C43/1/P695//P_695_62AA_CV101400///Offset in the file: 0x0415D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017707 and software number 1037510890. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C43

HardwareSoftwareVehicles
02810180191037512421Mercedes-Benz A160
64090242001037512418Mercedes-Benz B 200 CDI
64090242001037512420Mercedes-Benz A 180 CDI
64090244006409033700Mercedes-Benz B180 1.8 CDI
64090311001037510890Mercedes-Benz B180
64090400001037512420Mercedes-Benz B 180 CDI
64090400001037512421Mercedes-Benz A 160 CDI
CR40-640-62A8-169WC-080kW-EU5DPF-002_ME021037503501Mercedes-Benz B180

Bosch EDC17C43 original files

The Bosch EDC17C43 unit page