Original file

Mercedes-Benz A160 Bosch EDC17C43 0281018019 / 1037512421

An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz A160, hardware number 0281018019 and software number 1037512421, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A1602.0 diesel 060KW
Control unit
Bosch EDC17C43
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281018019
Software number
1037512421
Software / calibration
6409024200

Technical data

Vehicle
BrandMercedes-Benz
Car modelA160
Engine2.0 diesel 060KW
Control unit
Control unitBosch EDC17C43
ECU makerBosch
Hardware number0281018019
Software number1037512421
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key262497ab3c9539ae
Identification read from the file
ECU nameEDC17C43
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037512421Offset in the file: 0x02001A
Software / calibration6409024200Offset in the file: 0x020223
Data set number6409031500Offset in the file: 0x228CF0
Boot software6409040000Offset in the file: 0x00FC51
Bosch project identifier (EPK)45/1/EDC17C43/1/P695//P_695_6GA1__CV103500///Offset in the file: 0x0415D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018019 and software number 1037512421. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C43

HardwareSoftwareVehicles
02810177071037510890Mercedes-Benz W169
64090242001037512418Mercedes-Benz B 200 CDI
64090242001037512420Mercedes-Benz A 180 CDI
64090244006409033700Mercedes-Benz B180 1.8 CDI
64090311001037510890Mercedes-Benz B180
64090400001037512420Mercedes-Benz B 180 CDI
64090400001037512421Mercedes-Benz A 160 CDI
CR40-640-62A8-169WC-080kW-EU5DPF-002_ME021037503501Mercedes-Benz B180

Bosch EDC17C43 original files

The Bosch EDC17C43 unit page