Original file

Mercedes-Benz B180 1.8 CDI Bosch EDC17C43 6409024400 / 6409033700

An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz B180 1.8 CDI, hardware number 6409024400 and software number 6409033700, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz B180 1.8 CDI1.8 diesel 109.0PS / 80.2kW
Control unit
Bosch EDC17C43
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6409024400
Software number
6409033700
Bosch part / software
10SW085528

Technical data

Vehicle
BrandMercedes-Benz
Car modelB180 1.8 CDI
Engine1.8 diesel 109.0PS / 80.2kW
Control unit
Control unitBosch EDC17C43
ECU makerBosch
Hardware number6409024400
Software number6409033700
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key78eb70a1d22f76f0
Identification read from the file
ECU nameEDC17C43
Read typeCalibration only (data set)
Bosch part / software10SW085528Offset in the file: 0x04001A
Software / calibration6409024400Offset in the file: 0x0278A1
Data set number6409033700Offset in the file: 0x0278AC
Boot software6409040000Offset in the file: 0x027896
Bosch project identifier (EPK)45/1/EDC17C43/1/P695//P_695_73A0__CV213100///Offset in the file: 0x041080

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6409024400 and software number 6409033700. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C43

HardwareSoftwareVehicles
02810177071037510890Mercedes-Benz W169
02810180191037512421Mercedes-Benz A160
64090242001037512418Mercedes-Benz B 200 CDI
64090242001037512420Mercedes-Benz A 180 CDI
64090311001037510890Mercedes-Benz B180
64090400001037512420Mercedes-Benz B 180 CDI
64090400001037512421Mercedes-Benz A 160 CDI
CR40-640-62A8-169WC-080kW-EU5DPF-002_ME021037503501Mercedes-Benz B180

Bosch EDC17C43 original files

The Bosch EDC17C43 unit page