Original file

Mercedes-Benz A160 Bosch EDC17C43 CR40-640-62AA-169WM-060kW-EU5DPF-002_ME03 / 1037510893

An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz A160, hardware number CR40-640-62AA-169WM-060kW-EU5DPF-002_ME03 and software number 1037510893, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A1602.0 060KW
Control unit
Bosch EDC17C43
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-640-62AA-169WM-060kW-EU5DPF-002_ME03
Software number
1037510893
Software / calibration
6409024000

Technical data

Vehicle
BrandMercedes-Benz
Car modelA160
Engine2.0 060KW
FuelDiesel
Control unit
Control unitBosch EDC17C43
ECU makerBosch
Hardware numberCR40-640-62AA-169WM-060kW-EU5DPF-002_ME03
Software number1037510893
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7c028c068f599d0e
Identification read from the file
ECU nameEDC17C43
Read typeCalibration only (data set)
Bosch part / software1037510893Offset in the file: 0x04001A
Software / calibration6409024000Offset in the file: 0x028CE5
Data set number6409030800Offset in the file: 0x028CF0
Boot software6409040000Offset in the file: 0x028CDA
Bosch project identifier (EPK)44/1/EDC17C43/1/P695//P_695_62AA_CV101400///Offset in the file: 0x040BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-640-62AA-169WM-060kW-EU5DPF-002_ME03 and software number 1037510893. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C43

Bosch EDC17C43 original files

The Bosch EDC17C43 unit page