Original file

Mercedes-Benz A180 Bosch EDC17C43 CR40-640-62AA-169WM-080kW-EU5DPF-002_ME03 / 1037510890

An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz A180, hardware number CR40-640-62AA-169WM-080kW-EU5DPF-002_ME03 and software number 1037510890, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A180080KW
Control unit
Bosch EDC17C43
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR40-640-62AA-169WM-080kW-EU5DPF-002_ME03
Software number
1037510890
Software / calibration
6409024000

Technical data

Vehicle
BrandMercedes-Benz
Car modelA180
Engine080KW
FuelDiesel
Displacement2.0
Control unit
Control unitBosch EDC17C43
ECU makerBosch
Hardware numberCR40-640-62AA-169WM-080kW-EU5DPF-002_ME03
Software number1037510890
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7e4b751715a40235
Identification read from the file
ECU nameEDC17C43
Read typeCalibration only (data set)
Bosch part / software1037510890Offset in the file: 0x04001A
Software / calibration6409024000Offset in the file: 0x0296FD
Data set number6409031100Offset in the file: 0x029708
Boot software6409040000Offset in the file: 0x0296F2
Bosch project identifier (EPK)44/1/EDC17C43/1/P695//P_695_62AA_CV101400///Offset in the file: 0x040BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-640-62AA-169WM-080kW-EU5DPF-002_ME03 and software number 1037510890. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C43

HardwareSoftwareVehicles
CR40-640-62AA-169WC-080kW-EU5DPF-002_ME031037510890Mercedes-Benz B 180cdi 2010 80.2KWKW, Mercedes-Benz B180
CR40-640-62AA-169WM-060KW-EU5DPF-002_ME031037510893Mercedes-Benz A
CR40-640-62AA-169WM-060kW-EU5DPF-002_ME031037510893Mercedes-Benz A160
CR40-640-62AA-169WM-080KW-EU5DPF-002_ME031037510890Mercedes-Benz A180, Mercedes-Benz A, Mercedes-Benz B
CR40-640-62AA-169WM-103KW-EU5DPF-002_ME031037510892Mercedes-Benz B
CR40-640-62AA-245WC-080KW-EU5DPF-002_ME031037510890Mercedes-Benz B, Mercedes-Benz B W245 180CDI
CR40-640-6GA1-169WC-060kW-EU5DPF-002_ME041037512421Mercedes-Benz A160 2013 Turbo Diesel
CR40-640-6GA1-169WC-080kW-EU5DPF-002_ME041037512420Mercedes-Benz A, Mercedes-Benz B180, Mercedes-Benz A180

Bosch EDC17C43 original files

The Bosch EDC17C43 unit page