Original file

Mercedes-Benz B200 Bosch EDC17C43 CR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04 / 1037512418

An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz B200, hardware number CR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04 and software number 1037512418, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz B2001.8 diesel 140PS
Control unit
Bosch EDC17C43
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
CR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04
Software number
1037512418
Software / calibration
6409024200

Technical data

Vehicle
BrandMercedes-Benz
Car modelB200
Engine1.8 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C43
ECU makerBosch
Hardware numberCR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04
Software number1037512418
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye8a81c62094c437e
Identification read from the file
ECU nameEDC17C43
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037512418Offset in the file: 0x02001A
Software / calibration6409024200Offset in the file: 0x020223
Data set number6409031200Offset in the file: 0x229B00
Boot software6409040000Offset in the file: 0x00FC51
Bosch project identifier (EPK)45/1/EDC17C43/1/P695//P_695_6GA1__CV103500///Offset in the file: 0x0415D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04 and software number 1037512418. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz B-ClassFlash4,096.00 KB€15Add to cart
Mercedes-Benz B200Flash4,096.00 KB€15Add to cart
Mercedes-Benz A200Flash4,096.00 KB€15Add to cart
Mercedes-Benz B180Flash4,096.00 KB€15Add to cart
Mercedes-Benz A200Flash4,096.00 KB€15Add to cart
Mercedes-Benz BFlash4,096.00 KB€15Add to cart
Mercedes-Benz B200 2012y 2.0DFlash · From the file name: Mercedes B200 2012y 140HP 6404,096.00 KB€15Add to cart

All reads of CR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04 / 1037512418

Other pairs of Bosch EDC17C43

Bosch EDC17C43 original files

The Bosch EDC17C43 unit page