Original file
Mercedes-Benz A180 Bosch EDC17C43 CR40-640-6GA1-245WM-103KW-EU5DPF-002_ME04 / 1037512418
An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz A180, hardware number CR40-640-6GA1-245WM-103KW-EU5DPF-002_ME04 and software number 1037512418, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz A1801.6 diesel 140PS
- Control unit
- Bosch EDC17C43
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR40-640-6GA1-245WM-103KW-EU5DPF-002_ME04
- Software number
- 1037512418
- Software / calibration
- 6409024200
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | A180 |
| Engine | 1.6 diesel 140PS |
| Power | 140PS / 103.0kW |
| Control unit | Bosch EDC17C43 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR40-640-6GA1-245WM-103KW-EU5DPF-002_ME04 |
| Software number | 1037512418 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 427babe72ef0dc5e |
| ECU name | EDC17C43 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037512418 | Offset in the file: 0x04001A |
| Software / calibration | 6409024200 | Offset in the file: 0x029AF5 |
| Data set number | 6409031200 | Offset in the file: 0x029B00 |
| Boot software | 6409040000 | Offset in the file: 0x029AEA |
| Bosch project identifier (EPK) | 45/1/EDC17C43/1/P695//P_695_6GA1__CV103500/// | Offset in the file: 0x040BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR40-640-6GA1-245WM-103KW-EU5DPF-002_ME04 and software number 1037512418. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C43
| Hardware | Software | Vehicles |
|---|---|---|
| CR40-640-6GA1-169WM-103KW-EU5DPF-002_ME04 | 1037512418 | Mercedes-Benz B200, Mercedes-Benz A200, Mercedes-Benz B180 |
| CR40-640-6GA1-245WC-080KW-EU5DPF-002_ME04 | 1037512420 | Mercedes-Benz A180, Mercedes-Benz B |
| CR40-640-6GA1-245WC-103KW-EU5DPF-002_ME04 | 1037512418 | Mercedes-Benz W246, Mercedes-Benz B |
| CR40-640-6GA1-245WM-080KW-EU5DPF-002_ME04 | 1037512420 | Mercedes-Benz B |
| CR40-640-73A0-169WC-080kW-EU5DPF-001_ME213300 | 10SW085528 | Mercedes-Benz A180, Mercedes-Benz A180CDI |
| CR40-640-73A0-169WM-080KW-EU5DPF-001_ME213300 | 1037512420 | Mercedes-Benz A |
| CR40-640-73A0-169WM-080KW-EU5DPF-001_ME213300 | 10SW085528 | Mercedes-Benz A |
| CR40-640-73A0-169WM-080kW-EU5DPF-001_ME213300 | 6409024400 | Mercedes-Benz B180 |