Original file
Mercedes-Benz Bosch EDC17C43 CR40-640-74A0-169WM-080KW-EU5DPF-001_ME221600 / 10SW093593
An original (stock) flash read of the Bosch EDC17C43 control unit, fitted in Mercedes-Benz, hardware number CR40-640-74A0-169WM-080KW-EU5DPF-001_ME221600 and software number 10SW093593, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benzdiesel 080KW
- Control unit
- Bosch EDC17C43
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR40-640-74A0-169WM-080KW-EU5DPF-001_ME221600
- Software number
- 10SW093593
- Software / calibration
- 6409025000
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Engine | diesel 080KW |
| Control unit | Bosch EDC17C43 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR40-640-74A0-169WM-080KW-EU5DPF-001_ME221600 |
| Software number | 10SW093593 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 01ecac644ab1ffa6 |
| ECU name | EDC17C43 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW093593 | Offset in the file: 0x24001A |
| Software / calibration | 6409025000 | Offset in the file: 0x2278A1 |
| Data set number | 6409034100 | Offset in the file: 0x2278AC |
| Boot software | 6409040000 | Offset in the file: 0x227896 |
| Bosch project identifier (EPK) | 45/1/EDC17C43/1/P695//P_695_74A0__CV221300/// | Offset in the file: 0x241080 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C43 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR40-640-74A0-169WM-080KW-EU5DPF-001_ME221600 and software number 10SW093593. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C43
| Hardware | Software | Vehicles |
|---|---|---|
| CR40-640-6GA1-245WC-103KW-EU5DPF-002_ME04 | 1037512418 | Mercedes-Benz W246, Mercedes-Benz B |
| CR40-640-6GA1-245WM-080KW-EU5DPF-002_ME04 | 1037512420 | Mercedes-Benz B |
| CR40-640-6GA1-245WM-103KW-EU5DPF-002_ME04 | 1037512418 | Mercedes-Benz A180 |
| CR40-640-73A0-169WC-080kW-EU5DPF-001_ME213300 | 10SW085528 | Mercedes-Benz A180, Mercedes-Benz A180CDI |
| CR40-640-73A0-169WM-080KW-EU5DPF-001_ME213300 | 1037512420 | Mercedes-Benz A |
| CR40-640-73A0-169WM-080KW-EU5DPF-001_ME213300 | 10SW085528 | Mercedes-Benz A |
| CR40-640-73A0-169WM-080kW-EU5DPF-001_ME213300 | 6409024400 | Mercedes-Benz B180 |
| CR40-640-73A0-245WM-103kW-EU5DPF-001_ME213300 | 10SW085530 | Mercedes-Benz W246 |