Original file

Renault Maxity Bosch EDC17C45 0110555582 / 1037555582

An original (stock) flash read of the Bosch EDC17C45 control unit, fitted in Renault Maxity, hardware number 0110555582 and software number 1037555582, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Maxity3.0 diesel
Control unit
Bosch EDC17C45
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0110555582
Software number
1037555582
Software / calibration
P1533V150

Technical data

Vehicle
BrandRenault
Car modelMaxity
Engine3.0 diesel
Control unit
Control unitBosch EDC17C45
ECU makerBosch
Hardware number0110555582
Software number1037555582
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7d44a4d1d5f7d943
Identification read from the file
ECU nameEDC17C45
Read typeCalibration only (data set)
Bosch part / software1037555582Offset in the file: 0x18001A
Software / calibrationP1533V150Offset in the file: 0x180078
Bosch project identifier (EPK)38/1/EDC17_C45/20/P_1533//P1533V150///Offset in the file: 0x180078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0110555582 and software number 1037555582. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C45

HardwareSoftwareVehicles
1037546328Renault NT500, Nissan
1037555531Nissan NT400, Nissan Maxity, Nissan NV400
1037555577Renault Maxity
10SW027684Renault Maxity
025A1037532496Nissan D-Cab 3.0 DCI
02768215331037555578Nissan NT400
02810312301037536841Nissan NT500
02810337181037555531Nissan Cabstar / NT400

Bosch EDC17C45 original files

The Bosch EDC17C45 unit page