Original file

Nissan D-Cab 3.0 DCI Bosch EDC17C45 025A / 1037532496

An original (stock) flash read of the Bosch EDC17C45 control unit, fitted in Nissan D-Cab 3.0 DCI, hardware number 025A and software number 1037532496, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan D-Cab 3.0 DCI3.0 diesel 150.0PS / 110.3KW
Control unit
Bosch EDC17C45
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
025A
Software number
1037532496
Vehicle maker's hardware number
23710LD44A
Software / calibration
P1331V25A

Technical data

Vehicle
BrandNissan
Car modelD-Cab 3.0 DCI
Engine3.0 diesel 150.0PS / 110.3KW
Control unit
Control unitBosch EDC17C45
ECU makerBosch
Hardware number025A
Software number1037532496
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key87a6f80116c9530a
Identification read from the file
ECU nameEDC17C45
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037532496Offset in the file: 0x02001A
Vehicle maker's hardware number23710LD44AOffset in the file: 0x1CE98A
Software / calibrationP1331V25AOffset in the file: 0x035E80
Bosch project identifier (EPK)38/1/EDC17_C45/20/P_1331//P1331V25A///Offset in the file: 0x035E80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 025A and software number 1037532496. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C45

HardwareSoftwareVehicles
1037555531Nissan NT400, Nissan Maxity, Nissan NV400
1037555577Renault Maxity
10SW027684Renault Maxity
01105555821037555582Renault Maxity
02768215331037555578Nissan NT400
02810312301037536841Nissan NT500
02810337181037555531Nissan Cabstar / NT400
028103371810SW027682Nissan Cabstar / NT400

Bosch EDC17C45 original files

The Bosch EDC17C45 unit page