Original file

Audi A3 CR 2009 Turbo Bosch EDC17C46 03L906018AB / 1037508208

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A3 CR 2009 Turbo, hardware number 03L906018AB and software number 1037508208, 384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 CR 2009 Turbo2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
384.00 KB · Flash
Hardware number
03L906018AB
Software number
1037508208
Vehicle maker's hardware number
03L906018AG

Technical data

Vehicle
BrandAudi
Car modelA3 CR 2009 Turbo
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018AB
Software number1037508208
File
File typeOriginal flash read
File size384.00 KB (393,216 bytes)
From the file nameAudi A3 2.0 TDI CR
File keyd581c604b0212fe9
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037508208Offset in the file: 0x00001A
Vehicle maker's hardware number03L906018AGOffset in the file: 0x028E2A
Software / calibration03L906018AB · version 6744Offset in the file: 0x028E44
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5F8///Offset in the file: 0x000078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018AB and software number 1037508208. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018A1037561723Seat Ibiza 2.0 TDI, Seat Ibiza
03L906018A1037563161Audi pcmflash, Audi Ibiza, Audi A3 2.0TDI
03L906018A1037563649Seat Ibiza, Seat Ibiza 2.0 TDI, Seat pcmflash
03L906018A10SW049787Seat
03L906018AB1037516680Audi pcmflash
03L906018AC1037522924Audi pcmflash
03L906018AC1037558538Audi pcmflash
03L906018AD1037516679Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page