Original file

Audi pcmflash Bosch EDC17C46 03L906018AD / 1037564266

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi pcmflash, hardware number 03L906018AD and software number 1037564266, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 136PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018AD
Software number
1037564266
Vehicle maker's hardware number
03L906018AG

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018AD
Software number1037564266
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5ed0b1ed760f6881
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037564266Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018AGOffset in the file: 0x048E2A
Software / calibration03L906018AD · version 9980Offset in the file: 0x048E44
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5F8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018AD and software number 1037564266. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018AC1037522924Audi pcmflash
03L906018AC1037558538Audi pcmflash
03L906018AD1037516679Volkswagen pcmflash
03L906018AD1037561554Audi pcmflash
03L906018AE1037516678Volkswagen pcmflash
03L906018AE1037561756Audi pcmflash
03L906018AG03L906018AGAudi A3
03L906018AG1037505490Audi A3 2.0 TDI, Audi A3

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page