Original file

Audi A3 Bosch EDC17C46 03L906018AG / 1037508208

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A3, hardware number 03L906018AG and software number 1037508208, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A32.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018AG
Software number
1037508208
Software / calibration
03L906018AB

Technical data

Vehicle
BrandAudi
Car modelA3
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018AG
Software number1037508208
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyba7ca24326ad47a4
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037508208Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018AGOffset in the file: 0x048E2A
Software / calibration03L906018AB · version 6744Offset in the file: 0x048E44
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5F8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018AG and software number 1037508208. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi 8PFlash2,048.00 KB€15Add to cart
Audi A3Flash · From the file name: Audi A3 8P 2.0 TDI2,048.00 KB€15Add to cart
Audi A3Flash2,048.00 KB€15Add to cart
Audi A3Flash2,048.00 KB€15Add to cart
Audi A3Flash2,048.00 KB€15Add to cart
Audi A3 - A3 BerlineFlash2,048.00 KB€15Add to cart
Volkswagen Tiguan 2.0 TDIFlash2,048.00 KB€15Add to cart
Audi A3Flash2,048.00 KB€15Add to cart
Audi A3 2.0 TDIFlash2,048.00 KB€15Add to cart
Audi A3Flash2,048.00 KB€15Add to cart
Audi A3 - A3 BerlineFlash · From the file name: 3342,048.00 KB€15Add to cart
Audi A3 2.0 TDI CRFlash2,048.00 KB€15Add to cart

All reads of 03L906018AG / 1037508208

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018AG1037505490Audi A3 2.0 TDI, Audi A3
03L906018AG1037505491Audi A3
03L906018AG1037505492Audi A3, Audi A3 2.0 TDI, Audi A3 - A3 Berline
03L906018AG1037507685Audi A3 2.0 TDI, Audi A3 CR 2010 Turbo, Audi A3 CR 2011 Turbo
03L906018AG1037508209Audi A3, Audi A3 2.0 TDI
03L906018AG1037508210Audi A3 2.0 TDI, Audi Golf CR 2012 Turbo, Audi A3
03L906018AG1037508211Audi A3 2.0 TDI, Audi A3
03L906018AG1037508382Audi A3

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page