Original file

Volkswagen Passat Bosch EDC17C46 03L906018BD / 1037515557

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen Passat, hardware number 03L906018BD and software number 1037515557, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat2.0 diesel 170PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018BD
Software number
1037515557
Bosch part / software
10SW040571
Vehicle maker's hardware number
03L907309N

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine2.0 diesel 170PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BD
Software number1037515557
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyabdb99b3e2774390
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software10SW040571Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309NOffset in the file: 0x04F136
Software / calibration03L906018BD · version 9981Offset in the file: 0x04F150
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BD and software number 1037515557. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BC1037561508Audi A3 2.0 TDI, Volkswagen
03L906018BC1037563735Volkswagen Golf, Volkswagen Golf 6 2.0 TDI, Volkswagen Golf 2.0 TDI
03L906018BC10SW044969Volkswagen
03L906018BD1037513640Volkswagen Passat, Volkswagen Passat / Magotan, Volkswagen Passat / Magotan 2.0 TDI
03L906018BD1037527018Volkswagen Passat, Volkswagen Passat / Magotan 2.0 TDI, Volkswagen A3 2.0 TDI
03L906018BD1037561509Volkswagen Passat, Volkswagen Passat / Magotan, Volkswagen Passat 2.0 TDI 170 pk CR DPF
03L906018BD1037563663Volkswagen Passat, Volkswagen Passat CC / CC 2.0 TDI CR, Volkswagen pcmflash
03L906018BD10SW040571Volkswagen Passat

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page