Original file

Škoda Superb 2.0 TDI Bosch EDC17C46 03L906018BR / 040578

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Superb 2.0 TDI, hardware number 03L906018BR and software number 040578, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 2.0 TDI2.0 diesel 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018BR
Software number
040578
Bosch part / software
10SW040578
Software / calibration
03L906018JC

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 2.0 TDI
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BR
Software number040578
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydaec9592ab6067b8
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW040578Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x04F136
Software / calibration03L906018JC · version 9979Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BR and software number 040578. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BQ1037564369Audi pcmflash
03L906018BQ1037564483Audi pcmflash
03L906018BR03L906018BRŠkoda Superb
03L906018BR03L906018CTŠkoda Octavia
03L906018BR1037505457Škoda Yeti, Škoda Yeti 2.0 TDI CR DPF
03L906018BR1037505458Škoda Yeti 2.0 TDI, Škoda Yeti 2.0 TDI CR, Škoda Yeti
03L906018BR1037505459Škoda Yeti
03L906018BR1037508226Škoda Superb 2, Škoda Octavia 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page