Original file

Škoda Octavia 2 Bosch EDC17C46 03L906018BR / 1037513608

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Octavia 2, hardware number 03L906018BR and software number 1037513608, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Octavia 22.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018BR
Software number
1037513608
Software / calibration
03L906018EF

Technical data

Vehicle
BrandŠkoda
Car modelOctavia 2
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BR
Software number1037513608
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3b06ced1552250af
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037513608Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x04F176
Software / calibration03L906018EF · version 7802Offset in the file: 0x04F190
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5LA///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BR and software number 1037513608. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Škoda SuperbFlash2,048.00 KB€15Add to cart
Škoda Superb 2 2.0 TDIFlash2,048.00 KB€15Add to cart
Škoda Octavia 2 2.0 TDI CRFlash384.00 KB€15Add to cart
Škoda Octavia 2 2.0 TDI CRFlash2,048.00 KB€15Add to cart
Škoda SuperBFlash2,048.00 KB€15Add to cart
Škoda Superb 2 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906018BR / 1037513608

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BR1037510949Škoda Yeti
03L906018BR1037510950Škoda Superb 2, Škoda Superb 2 2.0 TDI CR
03L906018BR1037510951Škoda Superb 2, Škoda Superb, Škoda A4 2.0 TDI
03L906018BR1037510952Škoda Superb, Škoda Superb 2, Škoda Superb 2 2.0 TDI CR
03L906018BR1037513609Škoda Octavia 2 2.0 TDI CR, Škoda Octavia 2.0 TDI, Škoda Octavia 2
03L906018BR1037515576Škoda Octavia, Škoda Octavia 2 2.0 TDI, Škoda Octavia 2 2.0 TDI CR
03L906018BR1037516651Škoda Octavia 2 2.0 TDI CR
03L906018BR1037519377Škoda Yeti

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page