Original file

Škoda Bosch EDC17C46 03L906018BR / 1037525554

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda, hardware number 03L906018BR and software number 1037525554, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018BR
Software number
1037525554
Software / calibration
03L906018C

Technical data

Vehicle
BrandŠkoda
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BR
Software number1037525554
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5dd0cfff3231bcdb
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037525554Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x04F136
Software / calibration03L906018C · version 9813Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BR and software number 1037525554. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
ŠkodaFlash2,048.00 KB€15Add to cart
Škoda Octavia 2Flash2,048.00 KB€15Add to cart
Škoda Octavia 2.0 TDI CRFlash2,048.00 KB€15Add to cart

All reads of 03L906018BR / 1037525554

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BR1037525550Škoda Octavia 2 2.0 TDI, Škoda Octavia 2, Škoda Octavia
03L906018BR1037525551Škoda Octavia 2, Škoda Octavia, Škoda Octavia 2 2.0 TDI CR
03L906018BR1037525552Škoda Superb 2.0 TDI, Škoda A3 2.0 TDI, Audi
03L906018BR1037525553Škoda Superb 2, Škoda Superb
03L906018BR1037525555Škoda A4 2.0 TDI, Škoda Superb 2 2.0 TDI CR, Škoda Superb 2
03L906018BR1037529214Škoda Yeti, Škoda Yeti 2.0 TDI, Škoda pcmflash
03L906018BR1037529215Škoda Yeti 2.0 TDI, Škoda Yeti, Škoda Yeti 2.0 TDI CR
03L906018BR1037529230Škoda Yeti, Škoda Yeti 2.0 TDI CR, Škoda A3 2.0 TDI

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page