Original file

Škoda Octavia Bosch EDC17C46 03L906018BR / 1037564373

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Octavia, hardware number 03L906018BR and software number 1037564373, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Octavia2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018BR
Software number
1037564373
Software / calibration
03L906018C

Technical data

Vehicle
BrandŠkoda
Car modelOctavia
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BR
Software number1037564373
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key64682af908769652
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037564373Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x04F136
Software / calibration03L906018C · version 9980Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BR and software number 1037564373. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda OctaviaFlash2,048.00 KB€15Add to cart
Škoda Octavia 2Flash · From the file name: Skoda Octavia Typ 1Z 2.02,048.00 KB€15Add to cart
Škoda Octavia 2Flash2,048.00 KB€15Add to cart

All reads of 03L906018BR / 1037564373

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BR1037564366Škoda Yeti, Škoda Yeti 2.0 TDI CR, Škoda Yeti 2.0 TDI
03L906018BR1037564367Škoda Octavia 2.0 TDI, Škoda A3 2.0 TDI, Škoda Octavia
03L906018BR1037564369Škoda Yeti, Škoda Superb 2
03L906018BR1037564371Škoda Yeti, Škoda Yeti 2.0 TDI, Škoda pcmflash
03L906018BR1037564414Škoda
03L906018BR1037564483Škoda Yeti
03L906018BR1037564484Škoda Yeti 2.0 TDI, Škoda pcmflash, Škoda Yeti
03L906018BR1037564519Škoda Yeti

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page