Original file

Škoda Superb Bosch EDC17C46 03L906018BR / 10SW040578

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Superb, hardware number 03L906018BR and software number 10SW040578, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018BR
Software number
10SW040578
Software / calibration
03L906018JC

Technical data

Vehicle
BrandŠkoda
Car modelSuperb
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BR
Software number10SW040578
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3452ba51c84fe1ef
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software10SW040578Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x04F136
Software / calibration03L906018JC · version 9979Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BR and software number 10SW040578. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BR1037564519Škoda Yeti
03L906018BR1037564529Škoda A3 2.0 TDI, Audi
03L906018BR1037564553Škoda
03L906018BR1037564556Škoda
03L906018BR10SW043472Škoda
03L906018BR10SW044968Škoda Yeti
03L906018BR10SW045701Škoda
03L906018BR10SW045703Volkswagen pcmflash, Škoda

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page