Original file

Škoda Bosch EDC17C46 03L906018BR / 10SW047485

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda, hardware number 03L906018BR and software number 10SW047485, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018BR
Software number
10SW047485
Software / calibration
03L906018CG

Technical data

Vehicle
BrandŠkoda
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018BR
Software number10SW047485
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2d03bf2c72ce39a6
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW047485Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018BROffset in the file: 0x048E2A
Software / calibration03L906018CG · version 9978Offset in the file: 0x048E44
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5F8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018BR and software number 10SW047485. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018BR10SW045701Škoda
03L906018BR10SW045703Volkswagen pcmflash, Škoda
03L906018BR10SW046476Škoda
03L906018BR10SW046477Škoda Octavia, Škoda Octavia Combi
03L906018BR10SW048111Škoda
03L906018BS1037563647Škoda pcmflash
03L906018BT1037513616Volkswagen Caddy, Volkswagen Caddy CR 2010 Turbo
03L906018BT1037563261Volkswagen Caddy, Volkswagen Scirocco, Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page