Original file

Audi A4 Bosch EDC17C46 03L906018CN / 1037529210

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A4, hardware number 03L906018CN and software number 1037529210, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018CN
Software number
1037529210
Vehicle maker's hardware number
03L906018ES

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018CN
Software number1037529210
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 2.0 Tdi
File keyb01e9e6e9f792b32
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037529210Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018ESOffset in the file: 0x053A50
Software / calibration03L906018CN · version 9977Offset in the file: 0x053A6A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)535/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018CN and software number 1037529210. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen pcmflashFlash2,048.00 KB€15Add to cart

All reads of 03L906018CN / 1037529210

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018CM1037529209Volkswagen pcmflash
03L906018CM1037561786Volkswagen pcmflash
03L906018CM1037564392Volkswagen pcmflash
03L906018CM1037564485Volkswagen pcmflash
03L906018CN1037561744Volkswagen pcmflash
03L906018CN1037564364Volkswagen pcmflash
03L906018CN1037564508Volkswagen pcmflash
03L906018CP049673Volkswagen Passat CC

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page