Original file

Volkswagen Passat CR 2011 Turbo Bosch EDC17C46 03L906018CQ / 1037513643

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen Passat CR 2011 Turbo, hardware number 03L906018CQ and software number 1037513643, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat CR 2011 Turbo2.0 diesel · 136.0PS / 100.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018CQ
Software number
1037513643
Vehicle maker's hardware number
03L907309N

Technical data

Vehicle
BrandVolkswagen
Car modelPassat CR 2011 Turbo
Engine2.0 diesel
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018CQ
Software number1037513643
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Passat 2.0 TDI CR
File key1f9fa18714f45f99
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037513643Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309NOffset in the file: 0x04F136
Software / calibration03L906018CQ · version 8242Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018CQ and software number 1037513643. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018CP1037527013Volkswagen Passat, Volkswagen pcmflash
03L906018CP1037558581Volkswagen pcmflash
03L906018CP1037561002Volkswagen Passat, Volkswagen pcmflash
03L906018CP1037563694Volkswagen Passat, Volkswagen Passat 2.0 TDI, Volkswagen pcmflash
03L906018CQ1037527012Volkswagen pcmflash, Volkswagen Passat / Magotan
03L906018CQ1037561724Volkswagen Passat 2.0 TDI CR, Volkswagen pcmflash
03L906018CQ10SW048103Volkswagen
03L906018CR1037508245Seat Ibiza

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page