Original file

Volkswagen Bosch EDC17C46 03L906018CQ / 10SW048103

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Volkswagen, hardware number 03L906018CQ and software number 10SW048103, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen2.0 diesel 136PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018CQ
Software number
10SW048103
Vehicle maker's hardware number
03L907309N

Technical data

Vehicle
BrandVolkswagen
Engine2.0 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018CQ
Software number10SW048103
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key244fe28c6d00a07d
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW048103Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309NOffset in the file: 0x04F136
Software / calibration03L906018CQ · version 9979Offset in the file: 0x04F150
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018CQ and software number 10SW048103. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018CP1037563694Volkswagen Passat, Volkswagen Passat 2.0 TDI, Volkswagen pcmflash
03L906018CQ1037513643Volkswagen Passat CR 2011 Turbo
03L906018CQ1037527012Volkswagen pcmflash, Volkswagen Passat / Magotan
03L906018CQ1037561724Volkswagen Passat 2.0 TDI CR, Volkswagen pcmflash
03L906018CR1037508245Seat Ibiza
03L906018CR1037510973Seat Ibiza, Seat Ibiza 2.0 TDI, Seat pcmflash
03L906018CR1037563162Seat
03L906018CR1037563682Seat pcmflash, Seat Leon, Seat Ibiza

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page