Original file

Seat Bosch EDC17C46 03L906018CR / 1037563162

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Seat, hardware number 03L906018CR and software number 1037563162, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat2.0 diesel 142PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018CR
Software number
1037563162
Vehicle maker's hardware number
03L906018A

Technical data

Vehicle
BrandSeat
Engine2.0 diesel 142PS
Power142.8PS / 105.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018CR
Software number1037563162
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1027ed98d8243120
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563162Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018AOffset in the file: 0x048E2A
Software / calibration03L906018CR · version 9978Offset in the file: 0x048E44
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5F8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018CR and software number 1037563162. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018CQ1037561724Volkswagen Passat 2.0 TDI CR, Volkswagen pcmflash
03L906018CQ10SW048103Volkswagen
03L906018CR1037508245Seat Ibiza
03L906018CR1037510973Seat Ibiza, Seat Ibiza 2.0 TDI, Seat pcmflash
03L906018CR1037563682Seat pcmflash, Seat Leon, Seat Ibiza
03L906018CR10SW049675Seat
03L906018CT1037525551Škoda pcmflash
03L906018DA1037525550Škoda pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page