Original file

Škoda Yeti Bosch EDC17C46 03L906018DE / 1037522904

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Škoda Yeti, hardware number 03L906018DE and software number 1037522904, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti2.0 diesel 110PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018DE
Software number
1037522904
Vehicle maker's hardware number
03L907309R

Technical data

Vehicle
BrandŠkoda
Car modelYeti
Engine2.0 diesel 110PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018DE
Software number1037522904
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9e1dcd974d93794d
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037522904Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309ROffset in the file: 0x04F136
Software / calibration03L906018DE · version 8679Offset in the file: 0x04F150
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018DE and software number 1037522904. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda YetiFlash2,048.00 KB€15Add to cart
Škoda Yeti 2.0 TDIFlash2,048.00 KB€15Add to cart
ŠkodaFlash2,048.00 KB€15Add to cart
Škoda Yeti 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906018DE / 1037522904

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018DB1037536604Škoda pcmflash
03L906018DC1037522995Audi pcmflash
03L906018DC1037536606Audi pcmflash
03L906018DE1037511960Škoda Yeti, Škoda Caddy, Volkswagen
03L906018DE1037531633Volkswagen pcmflash, Škoda
03L906018DE1037561014Volkswagen Caddy
03L906018DE1037563196Volkswagen Caddy, Volkswagen Passat 2.0 TDI CR, Volkswagen pcmflash
03L906018DE1037564469Volkswagen Caddy, Volkswagen Caddy 2.0 TDI, Volkswagen pcmflash

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page