Original file

Audi Q5 Bosch EDC17C46 03L906018DN / 1037511977

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q5, hardware number 03L906018DN and software number 1037511977, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q52.0 diesel 170PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018DN
Software number
1037511977
Software / calibration
03L906018DL

Technical data

Vehicle
BrandAudi
Car modelQ5
Engine2.0 diesel 170PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018DN
Software number1037511977
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file name800
File key33bdf6b86d770456
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037511977Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018DNOffset in the file: 0x04ED92
Software / calibration03L906018DL · version 8202Offset in the file: 0x04EDAC
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C46/5/P941//C941DD5L9///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018DN and software number 1037511977. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q5Flash2,048.00 KB€15Add to cart

All reads of 03L906018DN / 1037511977

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018DN1037511939Audi Q5
03L906018DN1037511940Audi Q5
03L906018DN1037511941Audi Q5 CR 2010 Turbo, Audi Q5 CR 2011 Turbo
03L906018DN1037511942Audi Q5 2.0 TDI, Audi Q5 2.0 TDI CR, Audi Q5 CR 2010 Turbo
03L906018DN1037511978Audi Q5
03L906018DN1037513649Audi Q5
03L906018DN1037513655Audi A4 2.0 TDI
03L906018DN1037513664Audi Q5

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page