Original file

Audi A4 Allroad Quattro 2.0 TDI CR Bosch EDC17C46 03L906018DN / 1037513687

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A4 Allroad Quattro 2.0 TDI CR, hardware number 03L906018DN and software number 1037513687, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 Allroad Quattro 2.0 TDI CR2.0 diesel 163.0PS / 119.9kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906018DN
Software number
1037513687
Software / calibration
03L906018MR

Technical data

Vehicle
BrandAudi
Car modelA4 Allroad Quattro 2.0 TDI CR
Engine2.0 diesel 163.0PS / 119.9kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018DN
Software number1037513687
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key951d29944e6d1d28
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037513687Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018DNOffset in the file: 0x04EDEE
Software / calibration03L906018MR · version 0230Offset in the file: 0x04EE08
Bosch project identifier (EPK)35/1/EDC17_C46/5/P941//C941DD5LA///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018DN and software number 1037513687. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018DN1037511978Audi Q5
03L906018DN1037513649Audi Q5
03L906018DN1037513655Audi A4 2.0 TDI
03L906018DN1037513664Audi Q5
03L906018DN1037513691Audi Q5 2.0 TDI
03L906018DN1037515561Audi Q5, Audi Q5 2.0 TDI, Audi Q7 3000 V6
03L906018DN1037515563Audi Q5
03L906018DN1037515568Audi Q5, Audi Q3 2.0 TDI, Audi Q5 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page