Original file

Audi A3 - A3 Berline Bosch EDC17C46 03L906018DT / 1037510956

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi A3 - A3 Berline, hardware number 03L906018DT and software number 1037510956, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A3 - A3 Berline2.0 diesel 140PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018DT
Software number
1037510956
Software / calibration
03L906018EC

Technical data

Vehicle
BrandAudi
Car modelA3 - A3 Berline
Engine2.0 diesel 140PS
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018DT
Software number1037510956
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc96c6f1d0dee5242
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037510956Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018DTOffset in the file: 0x04F136
Software / calibration03L906018EC · version 7863Offset in the file: 0x04F150
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018DT and software number 1037510956. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018DS1037564278Audi/Skoda/Seat/VW Touran, Volkswagen
03L906018DS10SW040845Volkswagen Touran, Audi/Skoda/Seat/VW
03L906018DT1037508383Audi TT 2.0 TDI CR DPF
03L906018DT1037510940Audi TT, Audi TT2 2.0 TDI, Audi TT 2.0 TDI
03L906018DT1037519373Audi TT2 2.0 TDI, Audi TT
03L906018DT1037561539Audi A3 2.0 TDI, Audi TT
03L906018DT1037563644Audi TT, Audi TT Coupe 2.0 TDI Quattro 6AT - 170hp, Audi TT2 2.0 TDI
03L906018DT1037563722Audi TT, Audi TT Coupe 2.0 TDI Quattro 6AT - 170hp

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page