Original file

Audi Q3 Bosch EDC17C46 03L906018ES / 1037521086

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q3, hardware number 03L906018ES and software number 1037521086, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q32.0 diesel 177PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018ES
Software number
1037521086
Software / calibration
03L906018PH

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine2.0 diesel 177PS
Power177PS / 130.2kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018ES
Software number1037521086
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi Q3 Typ 8U 2.0
File key150a72d263dcf493
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037521086Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018ESOffset in the file: 0x05373E
Software / calibration03L906018PH · version 1793Offset in the file: 0x053758
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)135/1/EDC17_C46/5/P643//C643DX5WK///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018ES and software number 1037521086. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q3 2.0 TDI CRFlash4,096.00 KB€15Add to cart
Audi Q3Flash · From the file name: 2302,048.00 KB€15Add to cart
Audi Q3 CR 2011 TurboFlash · From the file name: Audi Q3 2.0 TDI CR2,048.00 KB€15Add to cart

All reads of 03L906018ES / 1037521086

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018EK1037561776Škoda pcmflash
03L906018EN1037561547Volkswagen pcmflash
03L906018ES1037521078Audi Q3, Audi Q3 2.0 TDI CR, Audi Q3 CR 2012 Turbo
03L906018ES1037521079Audi Q3, Audi A4 3.0 TDI CR, Audi Q3 2.0 TDI CR
03L906018ES1037521662Audi Q3 2.0 TDI CR, Audi Q3 CR 2010 Turbo
03L906018ES1037522905Audi Q3, Audi A4 Allroad Quattro CR
03L906018ES1037524130Audi Q3
03L906018ES1037524136Audi Q3

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page