Original file

Audi Q3 2.0 TDI CR Bosch EDC17C46 03L906018ES / 1037521662

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q3 2.0 TDI CR, hardware number 03L906018ES and software number 1037521662, 384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3 2.0 TDI CR2.0 diesel 140.0PS / 103.0kW
Control unit
Bosch EDC17C46
Read type
Calibration only (data set)
File
384.00 KB · Flash
Hardware number
03L906018ES
Software number
1037521662
Software / calibration
03L906018CM

Technical data

Vehicle
BrandAudi
Car modelQ3 2.0 TDI CR
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018ES
Software number1037521662
File
File typeOriginal flash read
File size384.00 KB (393,216 bytes)
File key4f3ff7ed15d9fb8a
Identification read from the file
ECU nameEDC17C46
Read typeCalibration only (data set)
Bosch part / software1037521662Offset in the file: 0x00001A
Vehicle maker's hardware number03L906018ESOffset in the file: 0x033A50
Software / calibration03L906018CM · version 2434Offset in the file: 0x033A6A
Bosch project identifier (EPK)435/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x00007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018ES and software number 1037521662. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q3 CR 2010 TurboFlash · From the file name: Audi Q3 2.0 TDI CR2,048.00 KB€15Add to cart

All reads of 03L906018ES / 1037521662

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018EN1037561547Volkswagen pcmflash
03L906018ES1037521078Audi Q3, Audi Q3 2.0 TDI CR, Audi Q3 CR 2012 Turbo
03L906018ES1037521079Audi Q3, Audi A4 3.0 TDI CR, Audi Q3 2.0 TDI CR
03L906018ES1037521086Audi Q3, Audi Q3 2.0 TDI CR, Audi Q3 CR 2011 Turbo
03L906018ES1037522905Audi Q3, Audi A4 Allroad Quattro CR
03L906018ES1037524130Audi Q3
03L906018ES1037524136Audi Q3
03L906018ES1037524137Audi Q3, Audi Q3 2.0TDI, Audi A3 - A3 Berline

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page