Original file

Audi Q3 2.0 TDI Bosch EDC17C46 03L906018ES / 1037528317

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q3 2.0 TDI, hardware number 03L906018ES and software number 1037528317, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3 2.0 TDI2.0 diesel 136.0PS / 100.0kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018ES
Software number
1037528317

Technical data

Vehicle
BrandAudi
Car modelQ3 2.0 TDI
Engine2.0 diesel 136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018ES
Software number1037528317
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya9341aa6225c55a7
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037528317Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018ESOffset in the file: 0x053A50
Software / calibration03L906018ES · version 4567Offset in the file: 0x053A6A
Bosch project identifier (EPK)635/1/EDC17_C46/5/P643//C643DX5WQ///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018ES and software number 1037528317. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018ES1037524137Audi Q3, Audi Q3 2.0TDI, Audi A3 - A3 Berline
03L906018ES1037527081Audi A3 2.0 TDI CR, Audi Q3
03L906018ES1037527083Audi Q3 2.0 TDI CR, Audi Tiguan CR 2010 Turbo, Audi Tiguan
03L906018ES1037527084Audi Q5 CR 2012 Turbo, Audi Q3
03L906018ES1037529209Audi Q3, Audi Q3 2.0 TDI CR, Audi Q5
03L906018ES1037529210Audi Q3, Audi Q3 2.0 TDI, Audi Q3 2.0 TDI CR
03L906018ES1037531637Audi Q3 2.0 TDI CR DPF, Audi Q3
03L906018ES1037532853Audi Q3, Audi Q3 2.0 TDI, Audi Q3 2.0 TDI CR

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page