Original file

Audi Q3 Bosch EDC17C46 03L906018ES / 1037531637

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q3, hardware number 03L906018ES and software number 1037531637, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q32.0 diesel 205HP
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018ES
Software number
1037531637
Software / calibration
03L906018RC

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine2.0 diesel 205HP
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018ES
Software number1037531637
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb341a2056a14ddf7
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037531637Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018ESOffset in the file: 0x053868
Software / calibration03L906018RC · version 5203Offset in the file: 0x053882
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)835/1/EDC17_C46/5/P643//C643DX5WV///Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018ES and software number 1037531637. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q3 2.0 TDI CR DPFFlash2,048.00 KB€15Add to cart

All reads of 03L906018ES / 1037531637

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018ES1037527084Audi Q5 CR 2012 Turbo, Audi Q3
03L906018ES1037528317Audi Q3 2.0 TDI
03L906018ES1037529209Audi Q3, Audi Q3 2.0 TDI CR, Audi Q5
03L906018ES1037529210Audi Q3, Audi Q3 2.0 TDI, Audi Q3 2.0 TDI CR
03L906018ES1037532853Audi Q3, Audi Q3 2.0 TDI, Audi Q3 2.0 TDI CR
03L906018ES1037536245Audi Q3
03L906018ES1037536617Audi Q3, Audi Q3 2.0 TDI CR DPF
03L906018ES1037561744Audi Q3 2.0 TDI, Audi Q3

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page