Original file

Audi Q3 Bosch EDC17C46 03L906018ES / 1037563638

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Audi Q3, hardware number 03L906018ES and software number 1037563638, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q32.0 diesel 176PS
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018ES
Software number
1037563638
Software / calibration
03L906018QQ

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine2.0 diesel 176PS
Power176.8PS / 130.0kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018ES
Software number1037563638
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya9f5779277662fff
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software1037563638Offset in the file: 0x08001A
Vehicle maker's hardware number03L906018ESOffset in the file: 0x053868
Software / calibration03L906018QQ · version 9978Offset in the file: 0x053882
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)035/1/EDC17_C46/5/P643//C643DX5WV//Offset in the file: 0x02007B

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018ES and software number 1037563638. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018ES1037561808Audi Q3
03L906018ES1037561876Audi Q3, Audi Q3 2.0 TDI, Audi Q5 2.0 TDI
03L906018ES1037563108Audi Q3 2.0 TDI, Audi Q3
03L906018ES1037563636Audi Q3 2.0 TDI CR DPF
03L906018ES1037564364Audi Q3 2.0 TDI, Audi Q3
03L906018ES1037564370Volkswagen pcmflash, Volkswagen A3, Audi
03L906018ES1037564392Audi Q3
03L906018ES1037564435Audi

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page