Original file

Cupra Leon 2.0 TDI Bosch EDC17C46 03L906018FJ / 048192

An original (stock) flash read of the Bosch EDC17C46 control unit, fitted in Cupra Leon 2.0 TDI, hardware number 03L906018FJ and software number 048192, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Cupra Leon 2.0 TDI2.0 diesel 150.0PS / 110.3kW
Control unit
Bosch EDC17C46
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906018FJ
Software number
048192
Bosch part / software
10SW048192
Software / calibration
03L906018HC

Technical data

Vehicle
BrandCupra
Car modelLeon 2.0 TDI
Engine2.0 diesel 150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C46
ECU makerBosch
Hardware number03L906018FJ
Software number048192
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyfc7d5ca5c85ef53a
Identification read from the file
ECU nameEDC17C46
Read typeFull read (boot area included)
Bosch part / software10SW048192Offset in the file: 0x02001A
Vehicle maker's hardware number03L906018FJOffset in the file: 0x04F136
Software / calibration03L906018HC · version 9978Offset in the file: 0x04F150
Bosch project identifier (EPK)34/1/EDC17_C46/5/P643//C643X5L8///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906018FJ and software number 048192. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C46

HardwareSoftwareVehicles
03L906018FF1037513613Volkswagen Passat / Magotan
03L906018FF1037527015Volkswagen Passat 2.0 TDI, Volkswagen Passat
03L906018FF1037531632Volkswagen Passat 2.0 TDI, Volkswagen Passat
03L906018FF1037561869Volkswagen Passat 2.0 TDI, Volkswagen pcmflash, Volkswagen Passat
03L906018FJ050335Seat Altea 2.0 TDI
03L906018FJ1037508294Seat Leon
03L906018FJ1037508295Seat Altea 2.0 TDI, Seat Leon, Seat Altea
03L906018FJ1037508296Seat Leon

Bosch EDC17C46 original files

The Bosch EDC17C46 unit page